GEOMETRON
G13

Trail

130mm

29"

The G13 shows that the Geolution Geometry works on trail bikes

The G13 shows that the GEOLUTION geometry works on trail bikes with 29-inch tires too. Whether you go for a multi-day alpine tour or only for a short, fast time at your local trail, the G13 makes both up and down quicker. Steep climbing with “old school” geometry bikes tends to lift the front wheel, not so with the G13. Due to the seat tube angle and the central seating position your front wheel will stay on the ground and the climb will be clean and controlled.

 

All “G” models have been completely redesigned including a new swingarm and adjustable dropouts which are lighter and stiffer. Likewise, the suspension response has been fine tuned with the use of quadruple sealed ball bearings. Sealed for the applause of the people taking the ION-G13 on wet and muddy winter rides. The proven Nicolai shock lever has been pushed through many FEM strength calculations in order to reduce the weight while keeping the same rigidity. Although our 5-axis CNC machine now runs a little longer, as a reward it’s lighter.

EXT Storia Lok

THE ADVANTAGE OF COIL SPRING SHOCK WITH THE LIGHTNESS OF AIR

The EXT Storia Lok was the first mountain bike coil shock to have a 2 way lock-out system, the Storia provides the best performance and comfort on uphills or transitions, without any bobbing. The LOK technology is different to any other lock-out systems as it has a completely independent valve to control the oil flow, it is possible to have firm lock-out and maximum grip when you need it to climb rocky uphills trails. Then when you want to ride down the hardest trails you have full grip but also a smoother and more comfortable shock. This equates to the most efficient lock-out system enabling you to transfer all your strength to the bike. The LOK system has a special blow-off valve, so if you forget switch before a downhill section you can ride it out. The Storia Lok is the lightest enduro mountain bike coil shock available, weighing in at only 635 grams including spring (196×57 version with a 325 lbs spring).

Lower. Slacker. Faster.

The G13 can do more than you might think at first glance – uphill as well as downhill

The ION G13 is a trail bike purpose built for long EPIC days in the saddle and trips to trail centres. Thanks to its progressive GeoMetron geometry, the G13 takes you uphill when other bikes are at their limits, and down the steepest passages safely. The G13 is a bike with an incredibly wide range of use – from the classic tour to the aggressive all-mountain. The ION G13 is the bike we want to ride every day on our own trails.

Your Build

G13 Specifications

Get in touch with your spec of choice and we'll go from there

  • landscape

    Frame Only

    £2,300

    Frameset

    Frame

    GEOMETRON G13

    Headset

    HOPE TAPERED HEADSET INTEGRAL – ZS44 / ZS56

    Rear Axle

    NICOLAI THRU AXLE (BOOST 148MMX12MM) 17MM HEX

  • landscape

    Frame & Shock

    £2,400

    Frameset

    Frame

    GEOMETRON G13

    Headset

    HOPE TAPERED HEADSET INTEGRAL – ZS44 / ZS56

    Rear Axle

    NICOLAI THRU AXLE (BOOST 148MMX12MM) 17MM HEX

    Seat Clamp

    HOPE SEAT CLAMP BOLT Ø34,9MM

    Suspension

    Shock

    ROCK SHOX MONARCH PLUS RC3 190X50MM

  • landscape

    Frame & EXT Long Travel Shock

    £2,950

    Frameset

    Frame

    GEOMETRON G13

    Headset

    HOPE TAPERED HEADSET INTEGRAL – ZS44 / ZS56

    Rear Axle

    NICOLAI THRU AXLE (BOOST 148MMX12MM) 17MM HEX

    Seat Clamp

    HOPE SEAT CLAMP BOLT Ø34,9MM

    Suspension

    Shock

    EXT STORIA LOK

  • landscape

    Frame, Shock & Fork

    £2,950

    Frameset

    Frame

    GEOMETRON G13

    Headset

    HOPE TAPERED HEADSET INTEGRAL – ZS44 / ZS56

    Seat Clamp

    Rear Axle

    NICOLAI THRU AXLE (BOOST 148MMX12MM) 17MM HEX

    Suspension

    Shock

    ROCK SHOX MONARCH PLUS RC3 190X50MM

    Fork

    ROCK SHOX PIKE RCT3 140MM 29″, BOOST™ 15X110

  • landscape

    Frame, Shock, Fork & Post

    £3,200

    Frameset

    Frame

    GEOMETRON G13

    Headset

    HOPE TAPERED HEADSET INTEGRAL – ZS44 / ZS56

    Rear Axle

    NICOLAI THRU AXLE (BOOST 148MMX12MM) 17MM HEX

    Seat Clamp

    HOPE SEAT CLAMP BOLT Ø34,9MM

    Suspension

    Shock

    ROCK SHOX MONARCH PLUS RC3 190X50MM

    Fork

    ROCK SHOX PIKE RCT3 140MM 29″, BOOST™ 15X110

    Cockpit

    Seatpost

    BIKEYOKE REVIVE 160MM OR 185MM

  • landscape

    XT Build

    £5,000

    Frameset

    Frame

    GEOMETRON G13

    Headset

    HOPE TAPERED HEADSET INTEGRAL -ZS44 / ZS56

    Seat Clamp

    HOPE SEAT CLAMP BOLT Ø34,9MM

    Rear Axle

    NICOLAI THRU AXLE (BOOST 148MMX12MM) 17MM HEX

    Suspension

    Shock

    ROCK SHOX MONARCH PLUS RC3 190X50MM

    Fork

    ROCK SHOX PIKE RCT3 140MM 29″, BOOST™ 15X110

    Cockpit

    Seatpost

    BIKEYOKE REVIVE 160/185MM

    Saddle

    WTB VOLT

    Stem

    HOPE AM STEM 0 DEG 35MM DIA

    Handlebar

    RENTHAL FATBAR35 20MM RISE 800MM WIDE

    Grips

    RENTHAL TRACTION LOCK-ON ULTRATACKY

    Drivetrain

    Chain

    SHIMANO M8000 XT CN-HG700-11

    Bottom Bracket

    HOPE STAINLESS 83MM – 30MM

    Crankset

    HOPE CRANKSET 83MM SINGLE SPIDER 170MM

    Shifters

    SHIMANO XT M8000 L-M8000-R

    Cassette

    SHIMANO M8000 XT 11-46T (11-13-15-17-19-21-24-28-32-37-46T)

    Chainring

    HOPE 32T SPIDERLESS RETAINER RING.

    Derailleur Rear

    SHIMANO M8000 SHADOW XT-GS

    Wheels & Tyres

    Front Tyre

    MAXXIS DHF 29×2.50

    Rear Tyre

    MAXXIS MINION DHR II 29×2.30

    Wheelset

    HOPE PRO4 ENDURO / 15×110 / 12×148

    Brakes

    Brakes

    HOPE TECH 3 E4

    Discs

    FLOATING 200MM/183MM

  • landscape

    XTR Build

    £5,200

    Frameset

    Frame

    GEOMETRON G13

    Headset

    HOPE TAPERED HEADSET INTEGRAL -ZS44 / ZS56

    Seat Clamp

    HOPE SEAT CLAMP BOLT Ø34,9MM

    Rear Axle

    NICOLAI THRU AXLE (BOOST 148MMX12MM) 17MM HEX

    Suspension

    Shock

    ROCK SHOX MONARCH PLUS RC3 190X50MM

    Fork

    ROCK SHOX PIKE RCT3 140MM 29″, BOOST™ 15X110

    Cockpit

    Seatpost

    BIKEYOKE REVIVE 160/185MM

    Saddle

    WTB VOLT

    Stem

    HOPE AM STEM 0 DEG 35MM DIA

    Handlebar

    RENTHAL FATBAR35 20MM RISE 800MM WIDE

    Grips

    RENTHAL TRACTION LOCK-ON ULTRATACKY

    Drivetrain

    Chain

    SRAM XX1 HOLLOW PIN 11 SPEED CHAIN SILVER 118 link

    Bottom Bracket

    HOPE STAINLESS 83MM – 30MM

    Crankset

    HOPE CRANKSET 83MM SINGLE SPIDER 170MM

    Shifters

    SHIMANO XTR –M9000-R

    Cassette

    SRAM XX1 XG1199 (10/12/14/16/18/21/24/28/32/36/42)

    Chainring

    HOPE SLICK GUIDE SHORTY – ISCG05

    Derailleur Rear

    SHIMANO XTR M9000 SHADOW -GS

    Wheels & Tyres

    Front Tyre

    MAXXIS DHF 29×2.50

    Rear Tyre

    MAXXIS MINION DHR II 29×2.30

    Wheelset

    HOPE PRO4 ENDURO / 15×110 / 12×148

    Brakes

    Brakes

    HOPE TECH 3 E4

    Discs

    FLOATING 200MM/183MM

  • landscape

    X01 Eagle Build

    £5,000

    Frameset

    Frame

    GEOMETRON G13

    Headset

    HOPE TAPERED HEADSET INTEGRAL -ZS44 / ZS56

    Seat Clamp

    HOPE SEAT CLAMP BOLT Ø34,9MM

    Rear Axle

    NICOLAI THRU AXLE (BOOST 148MMX12MM) 17MM HEX

    Suspension

    Shock

    ROCK SHOX MONARCH PLUS RC3 190X50MM

    Fork

    ROCK SHOX PIKE RCT3 140MM 29″, BOOST™ 15X110

    Cockpit

    Seatpost

    BIKEYOKE REVIVE 160/185MM

    Saddle

    WTB VOLT

    Stem

    HOPE AM STEM 0 DEG 35MM DIA

    Handlebar

    RENTHAL FATBAR35 20MM RISE 800MM WIDE

    Grips

    RENTHAL TRACTION LOCK-ON ULTRATACKY

    Drivetrain

    Chain

    SRAM X01 EAGLE HOLLOWPIN 126 LINKS 12 SPEED

    Bottom Bracket

    HOPE STAINLESS 83MM – 30MM

    Crankset

    HOPE CRANKSET 83MM SINGLE SPIDER 170MM

    Shifters

    X01 EAGLE TRIGGER 12 SPEED W DISCRETE CLAMP

    Cassette

    SRAM CASSETTE X01 EAGLE XG-1295 10-50 12 SPEED

    Chainring

    HOPE 32T SPIDERLESS RETAINER RING.

    Derailleur Rear

    SRAM REAR DERAILLEUR X01 EAGLE TYPE 3 12 SPEED

    Wheels & Tyres

    Front Tyre

    MAXXIS DHF 29×2.50

    Rear Tyre

    MAXXIS MINION DHR II 29×2.30

    Wheelset

    HOPE PRO4 ENDURO / 15×110 / 12×148

    Brakes

    Brakes

    HOPE TECH 3 E4

    Discs

    FLOATING 200MM/183MM

  • landscape

    XX1 Eagle Build

    £5,200

    Frameset

    Frame

    GEOMETRON G13

    Headset

    HOPE SEAT CLAMP BOLT Ø34,9MM

    Seat Clamp

    HOPE SEAT CLAMP BOLT Ø34,9MM

    Rear Axle

    NICOLAI THRU AXLE (BOOST 148MMX12MM) 17MM HEX

    Suspension

    Shock

    ROCK SHOX MONARCH PLUS RC3 190X50MM

    Fork

    ROCK SHOX PIKE RCT3 140MM 29″, BOOST™ 15X110

    Cockpit

    Seatpost

    BIKEYOKE REVIVE 160/185MM

    Saddle

    WTB VOLT

    Stem

    HOPE AM STEM 0 DEG 35MM DIA

    Handlebar

    RENTHAL FATBAR35 20MM RISE 800MM WIDE

    Grips

    RENTHAL TRACTION LOCK-ON ULTRATACKY

    Drivetrain

    Chain

    SRAM XX1 EAGLE HOLLOWPIN 126 LINKS 12 SPEED

    Bottom Bracket

    HOPE STAINLESS 83MM – 30MM

    Crankset

    HOPE CRANKSET 83MM SINGLE SPIDER 170MM

    Shifters

    X01 EAGLE TRIGGER 12 SPEED W DISCRETE CLAMP

    Cassette

    XX1 EAGLE XG-1299 10-50 12 SPEED GOLD,12SPD 10-50T

    Chainring

    HOPE 32T SPIDERLESS RETAINER RING.

    Derailleur Rear

    SRAM REAR DERAILLEUR X01 EAGLE TYPE 3 12 SPEED

    Wheels & Tyres

    Front Tyre

    MAXXIS DHF 29×2.50

    Rear Tyre

    MAXXIS MINION DHR II 29×2.30

    Wheelset

    HOPE PRO4 ENDURO / 15×110 / 12×148

    Brakes

    Brakes

    HOPE TECH 3 E4

    Discs

    FLOATING 200MM/183MM

Measurements

Scroll right to view all sizes

Letter Location Small Medium Large Extra Large
C Seat Tube Length 420mm 450mm 470mm 500mm
D Seat Tube Angle 76.7°/76° 76.7°/76° 76.7°/76° 76.7°/76°
E Head Tube Length 110mm 120mm 130mm 150mm
F Head Tube Angle 64.2°/65.2° 64.2°/65.2° 64.2°/65.2° 64.2°/65.2°
G Reach 460mm 490mm 510mm 530mm
H Stack 601mm 610mm 619mm 637mm
I Chainstay Length 445mm 445mm 445mm 445mm
J Fork Offset 51mm 51mm 51mm 51mm
K Standover 716mm 744mm 763mm 775mm
L Wheelbase 1237mm 1270mm 1296mm 1323mm

CHAIN STAY MUTATOR

Adjustability is key.

Chain stay length is adjustable via the rearmost mutator, available in differing lengths (33mm, 41mm and 47mm). No need to worry about creaks or servicing issues as the inner and outer chain stay mutator shells are positively connected via a wedge-shaped rectangular structure within the rocker. Twisting is prevented via thoughtful design. The mutators aren’t a one trick pony, they also function as the bearing axis – we spec readily available and cheap 6001 2RS bearings.

7020-T6 ALUMINIUM

ALUMINIUM IS NOT ALUMINIUM!

We exclusively use 7020-T6 alloy (AlZn4,5Mg1) for our frames. Compared to our competitors, who mostly use aluminium 6061-T6, the tensile strength of 7020 compared to 6061 aluminium is about one third higher. The elasticity is about one fifth higher. These properties, coupled with high quality welding, result in a bicycle frame that is far superior to the average in terms of durability. In comparison to carbon, aluminium is much more robust and tough, so that bottom contact, falls or stone impacts cannot harm the structure.

ET KEY

THE RIGHT SETTING FOR EVERY TRAIL.

With the ET-Key, the range of application of the frame can be adjusted in a few easy steps. The ET-KEY changes the kinematically active length of the compression strut. With the models ION-G13, ION-G15 you can adjust the steering angle and the bottom bracket height, e.g. for a visit to the bike park or a steeper trail.

ALWAYS RECOGNISABLE BY ITS WELDS

Our evenly flat scaled welds are produced by a very slow welding speed.

The wide, flat shape of the seam ensures optimum force dissipation in the area of the weld. Welded in several passes by TIG (tungsten inert gas) in order to minimize distortion. Very large loads, such as those caused by jumping or braking, are absorbed by so-called “casting sets”, which are additionally welded onto the frame. For you as a customer, this creates a long-lasting product that can offer many years of fun even under the toughest conditions in racing.

ANGULAR CONTACT BEARINGS

4 WAY SEALED.

The rear triangle of a full suspension bike is not a statically rigid component and is exposed to extreme loads during riding. We spec full complement, double-sealed ball bearings as they have a higher load rating than standard ball bearings, as a higher number of balls are used in these bearings – in summary, they are more robust. These are then further protected by two additional O-ring seals located on the pre-load caps. Thus, the bearings are optimally protected against moisture and dirt.

RADO

REAR ALIGNING DROPOUT.

The right side dropout (gear hanger) allows us to reduce the rectification work on the frame which also means less stress on the material. The hanger is marked with the indices -1 -2 0 +1 +2 for different toe and camber adjustments.

Paint the mountains

Custom paint jobs available

We can offer the ability to get a custom paint job on your GeoMetron. If you have a colour combination in mind, get in touch.

Who we build with

We only use product that we would personally use ourselves, that's why we try each item before we start using them in our bikes

Contact Us

We aim to get back to you within 48 hours